 | |||
          |
|
VERY HEAVY DUTY DOOR HINGES WE OFFER THREE MODELS MADE HERE IN PERKIOMENVILLE, PA (scroll down) All three models have 180 degrees of swing.
We will customize your Hinges. Installation of your Heavy Door Hinges is available at your site. Just call or email us.
$299
The 6000 lb Hinge is shown with heavy duty roller thrust bearing, assembled dimensions...11" high x13" wide.
Our hinges are being used on bank vaults and to improve levees in the Gulf area.
This Heavy Door Hinge is cast 1025 low carbon steel construction and can be ordered with
precision bronze or roller bearings for both the radial and the thrust bearings. The hinge pin is 3/4" 1045 steel.
We will build our 6000 lb. model hinge from cast stainless or solid bronze. Call for an estimate
or further specs.
Discounts for 9 or more. Call 610-754-1117 or
larry@waiteenterprises.com
Welded on or bolted.
We accept Visa and MasterCard
1-800-476-3674
FAX: 610-754 1002
MADE IN THE USA
299 USD
20,000 lb Heavy Door Hinge 20,000 lb. capacity on a 5' wide x 8' high door
$449
The
20,000 lb Heavy Door Hinge is shown with heavy duty roller thrust bearing. Assembled dimensions
are are 15" high x 18" wide.
Our hinges are being used by the US Army for 2" thick steel explosion proof
bunker doors at the Yuma, AZ proving grounds, and on other explosion resistant
structures for the US government.
This hinge
With a slight modification to a 1 3/4" pin, two of these hinges can handle a 35,000 lb. door.
Deep discounts for 9 or more. Call for an estimate or
further specifications: They can be welded on or bolted on.
We accept Visa and MasterCard
1-800-476-3674
FAX: 610-754 1002 MADE IN THE USA 449 USD 2000 lb Heavy Door Hinge 2000 lb. capacity on a 5' wide x 8' high door
$149 This hinge is cast 1025 low carbon steel, with precision SAE 660 bronze bearings. Assembled dimensions are 6.5 inches long (top to bottom in this picture) x 5.5 inches wide. The hinge pin is 1045 steel, 1/2" diameter. For marine applications it works well out of solid bronze or stainless steel. Looks good on any door. Call 610-754-1117 or larry@waiteenterprises.com for further specifications. They can be welded or bolted on. We will also sell the 2000 lb. hinge without bearings for those who only open the door occasionally. These are for weld on only. We add a grease fitting to lubricate each end of the pin in its hole. Grease also keeps water out. Now $74.50 for a bearingless, precision fitted, weld on hinge, 2000 lb. capacity (5'x8' door). Most applications for this hinge size can be done with a bearingless hinge
We accept Visa and MasterCard
1-800-476-3674
FAX: 610-754 1002 MADE IN USA
149 USD
Meeting Our Customer's Needs Since 1994
© 2005 WAITE ENTERPRISES
<
[HOME]
|
|
